This is an old revision of the document!

Capturing 3.0 Data

To capture 3.0 data for RabbitEars, follow these steps.

1) On Windows, open HDHomeRun Config GUI and tune to your 3.0 station(s). On Linux, tune to the 3.0 station, then open a command line and run this command: hdhomerun_config <device_id> get /tuner0/plpinfo

2) View what PLPs are available to you on each 3.0 station. May just be PLP0, may be a PLP0 and PLP1, etc. This example will assume you have a PLP0 and PLP1 on channel 36. If there's a PLP16, do not include it.

3) Open your browser and go to this address with changes to reflect the channel number and PLPs:

http://hdhomerun.local:5004/auto/ch36p0p1?duration=15&format=dbg

Save the file with a name like the callsign of the station.

4) Upload it to something like Google Drive, DropBox, OneDrive, etc. and send me the link and, if you can, the contents of the PLP info. In the alternative, I have an FTP available that it can be uploaded to.

Any opinions expressed on this site are those of the authors and do not necessarily reflect those of the FCC.